PG-2-300 Spectrum Plane Grinding Machine

Category： Plane Grinding Machine

Views：10

Adjustable 100-1400 r/min, or 4 speeds 300 r/min,600 r/min,900 r/min,1400 r/min

300mm Grinding Disc

DC Brushless Motor, 220V, 1.1KW

Novel and beautiful appearance

Product description：PG-2-300 Spectrum Plane Grinding Machine

PG-2-300 Spectrum Plane Grinding Machine Description:

●Pre-grinding,polishing are the indispensable procedures in the process of preparation of metallographic sample, , which are usually finished by the grinding and polishing machine.

●For some rough work pieces, according to the different kinds of requirements of the customer, designs GPM-2-300 designed,

●PG-2-300 has novel and beautiful appearance, and the whole frame adopts spray process.

●PG-2-300 is easy to use and the abrasive paper is also convenient to be replaced. It saves time and avoids wasting.

●Dust collecting device equiped inside, safe and environmental protective.

●PG-2-300 starts steadily and has large transmission power with low noise.

●PG-2-300 can be adapted to various materials preparation of test samples, improves the quality and efficiency of the grinding and polishing.

PG-2-300 Spectrum Plane Grinding Machine Specification :

Product Name	Metallographic Spectrum Plane Grinding Machine
Model	PG-2-300
Rotating Speed	Adjustable 100-1400 r/min,   or 4 speeds   300 r/min,600 r/min,900 r/min,1400 r/min
Abrasive Paper	300mm
Grinding Disc	300mm
Electric Motor	DC Brushless Motor, 220V, 1.1KW
Machine Dimensions	820×440×940mm
Net Weight	115kg

PG-2-300 Spectrum Plane Grinding Machine Packing List:

Packing List	Packing List	Packing List
Machine Mainframe	6 pcs Abrasive Paper	Instruction Manual
2 pcs Grinding disc	M6 Inner hexagon spanner	Product Certificate

VP-300 Vibration Polishing Machine

Product Item : VP-300 Vibration Polishing Machine

Category： Metallographic Polishing Machine

Views：16

Reduces dependence on staff skills and achieves higher polishing effect

Simple operation, wide applicability

300mm Polishing Diameter

ф22, ф30, ф45mm Clamping Sample Diameter

Product description：VP-300 Vibration Polishing Machine

VP-300 Vibration Polishing Machine Description:

●Vibration polishing machine design reduces dependence on staff skills and achieves higher polishing effect.

●Spring plate and magnetic induction motor producing vibration. 
●Simple operation, wide applicability; almost can be applied to all kinds of materials; set polishing time according to sample state; large polished area; not produce any additional damage and deformation layer in the polishing process ; can effectively remove and avoid embossed, embedded and plastic rheological defects. 
● can produce almost completely horizontal vibration, which maximizes the time for sample to contact polishing cloth. 
●user can leave after setting program, sample will automatically begin to vibrate on the polishing disc. And a number of samples can be placed at one time, greatly improves work efficiency. 
●Anti-dust cover can ensure the cleanliness of the polishing disc. 
●The whole machine adopts ABS material, the appearance is novel and beautiful, 
●Vibration frequency can be automatically adjusted with the working voltage 
●VP-300 is not suitable for polishing specimen with very rough surface,which consumes too much time.

VP-300 Vibration Polishing Machine Specification:

Product Name	Vibration Polishing Machine
Model	VP-300
Polishing Disc Diameter	300mm
Polishing Cloth Diameter	300mm
Vibration Power	1.5kw
Vibration Voltage	Adjustable 50-90v
Vibration Frequency	Adjustable 25-400Hz
Voltage Using	220V
Max Setting Time	Ex-factory setting 3 hours
Clamping Sample Diameter	ф22, ф30, ф45mm
Machine Dimensions	450×565×400mm
Net Weight	90kg

VP-300 Vibration Polishing Machine Packing List:

Packing List	Packing List	Packing List
Machine Mainframe	Clamp DeviceФ45mm 2 pcs	Ф300mm Polishing Cloth
Clamp DeviceФ22mm 2 pcs	3/5mm Wrench	Level Block
Clamp DeviceФ30mm 2 pcs	6mm Wrench	Instruction Manual/Product Certificate

MEP-2 Electropolishing Machine

Category： Metallographic Polishing Machine

Views：16

300~1000ml Electrolyte Capacity

DC 0~60V / 0~25, continuous adjustment, digital display

Principles of electrochemical

High efficiency of polishing

Product description： Electropolishing Machine

MEP-2 Electropolishing Machine Description:

●Making metallographic samples by principles of electrochemical .

●The metallographic samples made by the electrolytic polishing and etching have no deformed strata brought out by the mechanic polishing, and so their compositions is genuine without any false element.

●The best way to make the non-ferrous and high-thermal alloy samples such as titanium, aluminium and copper.

●With a rather high working voltage and large electric current, the instrument leaves large room for making larger metallographic samples, especially the melded samples.

●Characterized by its continuous, stable and adjustable output of electric current and voltage for the electrolytic polishing and etching, and by its showing in actual time the working voltage, electric current, polishing (etching) time and the temperature of the electrolyte, as well as by its easily repetition of the polishing and etching processes.

●All this is useful to determine the metallographic composition and thermal processing. And more over, the polished (corroded) superficial space is adjustable, that is, it may be adjusted according to the actual conditions of the specimen, and hence the instrument is suitable to make samples of all kinds of materials, sizes, and shapes.

●Adopts special methods for the recycling and cooling of the electrolyte with a high efficiency of polishing, better than other stirring and mixing methods .

●An outer cover made of inoxidizable and acid resisting steel with its surface spray-painted-the double anti-corrosive structure, whereas the electrolyte container is made of acid proof material so as to assure the long and reliable use of the instrument.

●Electric leakage-proof function.

MEP-2 Electropolishing Machine Specifications:

Model	MEP-2
Product Name	Metallographic Electropolishing Machine
Input Power	AC 220V,10A(Max)
Electrolytic Output	DC 0~60V / 0~25,  continuous adjustment, digital display
Electrolyte Capacity	300~1000ml
Electric box size	450×420×230mm
Corrosion work table	270×230×320mm
Net weight	10kg

MEP-2 Electropolishing Machine Standard Packing List:

Items	Items	Items
Mainframe/Electric Box	Control Power Supply	Specimen Holed Cup φ15mm
Corrosion Table	Specimen Holed Cup φ10mm	Specimen Holed Cup φ20mm

P-1B Metallographic Polisher

Category： Metallographic Polishing Machine

Views：15

230mm Polishing Disc

900r/min Rotating Speed

Operates steadily in low noise

Equipped with polishing water supply system

Product description：P-1B Metallographic Polisher

P-1B Metallographic Polisher Description:

●P-1B operates steadily in low noise, and easily to use and maintain.

●Bigger size  polishing wheel and the transmission power .

●P-1B adjusts to  kinds of materials polishing work.

●P-1B is equipped with polishing water supply system.

●P-1B is the ideal equipment for metallographic sample polishing.

P-1B Metallographic Polisher Specification：

Product Name	Metallographic Polishing Machine
Model	P-1B
Polishing Disc	230mm
Rotating Speed	900r/min
Electric Motor	YS7116   0.2KW  380V  50HZ
Dimensions	480×400×260mm
Net Weight	22Kg

P-1B Metallographic Polisher Packing List:

Packing List	Packing List	Packing List
Mainframe	Ring	Ferrule
Product Certificate	Instruction Manual	Warranty Card

P-1D/2D Metallurgical Polishing Machine

Category： Metallographic Polishing Machine

Views：15

Ø200mm Platen Diameter

1400r/min or 900r/min Rotate Speed

Equipped with the beautiful and practical plastic shell

A single work disc or two-disk models

Product description：P-1D/2D Metallurgical Polishing Machine

P-1D/2D Metallurgical Polishing Machine Description :

●Beautiful design

●Motor fitted in machine body

●Polishing Disc fitted onto main shaft of motor through taper sleeve

●Aluminum retaining ring presses the polishing textile against polishing disc

●Waste Liquid can be splashed out via plastic pipe.

●Most economical and practical equipment for metallurgical sample preparation

●Equipped with the beautiful and practical plastic shell.

●Plastic Cover preventing dust or other things outside.

●A single work disc or two-disk models for selection for quick replacement.

●Rotating Steadily, low noise, you can get specimen surface as bright as mirror with using this machine for testing metallurgical structure.

P-1D/2D Metallurgical Polishing Machine Specification :

Model	P-1D	P-2D
Product Name	Metallographic Polishing Machine
Platen Diameter	Ø200mm	Ø200mm
Motor	YY6334/180W	YY6334/180W
Rotate Speed	1400r/min or 900r/min	1400r/min or 900r/min
Power Supply	380V,50Hz/220V,50Hz	380V,50Hz/220V,50Hz
Dimension	360×300×320mm	730×405×308mm
Net Weight	16Kg	35Kg

P-1D/2D Metallurgical Polishing Machine Packing List:

Model	P-1D	P-2D
Machine Mainframe	1 pc	1 pc
Viscose rayon	1 pc	2 pcs
Cover Button	1 pc	2 pcs
Anti-dust Cover	1 pc	2 pcs
Instruction Manual	1 pc	1 pc
Product Certificate	1 pc	1 pc
questionnaire Sheet	1 pc	1 pc
Packing List Profile	1 pc	1 pc

TAGP Automatic Grinding Polishing Machine

Category： Metallographic Grinding Polishing Machine

Views：14

The latest product with beautiful appearance

High resolution LCD touch screen panel

DC brushless motor

The platen speed of polishing disc operates independently

Product description：Automatic Grinding Polishing Machine

TAGP Automatic Grinding Polishing Machine Description:

●Produced with ABS material.

●The latest product with beautiful appearance. 
●High resolution LCD touch screen panel 
●Controlled by single chip microcomputer. 
●DC brushless motor. 
●Non-toxic painted. Strong large support chassis design ensures the precision rotary balance.Powerful motor brings strong power and efficient grinding and polishing . 
●Spindle leak-proof design and the super mute design 
●It supports for fast disk system, with the use of elasticity, and can be used with automatic grinding device. 
●It can replace the manual grinding and polishing of the procedure, timing and set the speed of grinding head. 
●It can increase the grinding quality and production efficiency ,it is adapted to various materials preparation of test samples. 
●The platen speed of polishing disc operates independently.

TAGP Automatic Grinding Polishing Machine Specification:

Model	TAGP-2-250	TAGP-2-300
Product Name	Touch Screen Automatic Grinding and Polishing Machine
Fuction	Magnetic Dual Discs , Stepless, Auto-head
Polishing and Grinding Disc Diameter	250mm	300mm
Rotating speed	100～1000r/min, stepless Or four speed 250r/min, 500r/min, 750r/min, 1000r/min
Motor	DC Brushless Motor, 220V, 1.1kw
Rotating Speed	Stepless 30~120r/min
Center Cylinder Pressure	0-0.5Mpa (Suggest 0.3~0.4 Mpa)
Planetary Cylinder Pressure	0-0.5Mpa (Suggest 0.2~0.3 Mpa)
Sample installation quantity	6
Motor of Grinding Head	DC Brushless Deceleration Motor,  220V, 100W
Dimensions	725×1200×760mm
Net Weight	135Kg

TAGP Automatic Grinding Polishing Machine Packing List :

Item	TAGP–2-250	TAGP–2-300
Machine Mainframe	1Set	1Set
Grinding&Polishing Disc	2pc	2pcs
Magnetic Plate	2pcs	2pcs
Backing Plate	6pcs	6pcs
Adhesive Abrasive Paper	6pcs	6pcs
Adhesive Polishing Cloth	4pcs	4pcs
Water Flow-in Pipe	Input 1pc, Output 2pcs	Input 1pc, Output 2pcS
Instruction Manual	English	English
Product Certificate	English	English

TAGP Metallographic Grinding Polishing Machine

Category： Metallographic Grinding Polishing Machine

Views：25

High resolution LCD touch screen panel

Controlled by single chip microcomputer

The platen speed of polishing disc operates independently.

Magnetic Single Disc , Stepless, Auto-head

Product description：TAGP-1-250/300 Metallographic Sample Grinding and Polishing Machine

TAGP Metallographic Grinding  Polishing MachineDescription:

●Produced with ABS material.

●The latest product with beautiful appearance. 
●High resolution LCD touch screen panel 
●Controlled by single chip microcomputer. 
●DC brushless motor. 
●Non-toxic painted. Strong large support chassis design ensures the precision rotary balance.Powerful motor brings strong power and efficient grinding and polishing . 
●Spindle leak-proof design and the super mute design 
●It supports for fast disk system, with the use of elasticity, and can be used with automatic grinding device. 
●It can replace the manual grinding and polishing of the procedure, timing and set the speed of grinding head. 
●It can increase the grinding quality and production efficiency ,it is adapted to various materials preparation of test samples. 
●The platen speed of polishing disc operates independently.

TAGP Metallographic Grinding  Polishing MachineTechnical Specification:

Model	TAGP-1-250	TAGP-1-300
Product Name	Touch Screen Automatic Grinding and Polishing Machine
Function	Magnetic Single Disc , Stepless, Auto-head
Polishing and Grinding Disc Diameter	250mm	300mm
Rotating Speed	100～1000r/min, stepless Or four speed 250r/min, 500r/min, 750r/min, 1000r/min
Motor	DC Brushless Motor, 220V, 1.1kw
Rotating Speed of Grinding Head	Stepless 30~120r/min,
Center Cylinder Pressure	0-0.5Mpa (Suggest 0.3~0.4 Mpa)
Planetary Cylinder Pressure	0-0.5Mpa (Suggest 0.2~0.3 Mpa)
Sample Installation Quantity	6
Motor of Grinding Head	DC Brushless Deceleration 220V, 100W Motor,
Dimensions	725x500x760mm
Net Weight	75kg

TAGP Metallographic Grinding  Polishing Machine Packing List:

Item	TAGP-1-250	TAGP-1-300
Machine Mainframe	1Set	1Set
Grinding&Polishing Disc	1pc	1pc
Magnetic Plate	1pc	1pc
Backing Plate	3pcs	3pcs
Adhesive Abrasive Paper	6pcs	6pcs
Adhesive Polishing Cloth	2pcs	2pcs
Water Flow-in Pipe	Input 1pc,  Output 1pc	Input 1pc,    Output 1pc
Instruction Manual	English	English
Product Certificate	English	English

DAGP-230 Digital Automatic Metallographic Grinding Polishing Machine

Category： Metallographic Grinding Polishing Machine

Views：11

Grinding Speed, Timing, Steering and Tank Cleaning Function

Membrane Switch, Digital Display

Controlled by single chip microcomputer

Be adapted to various materials preparation of test samples

Product description：DAGP-230 Digital Automatic Metallographic Grinding Polishing Machine

DAGP-230 Digital Automatic Metallographic Grinding Polishing Machine Description:

●Produced with plastic sewage collection plate and cover with a new and beautiful appearance. 
●Grinding Speed, Timing, Steering and Tank Cleaning Function 
●Membrane Switch, Digital Display. 
●Controlled by single chip microcomputer, grinding disc 100RPM-1000RPM of stepless speed regulation with digital tube display. 
●DC brushless motor and don’t need to replace the brush, used for a long time. 
●The machine is plastic painted and non-toxic. Strong large support chassis design ensures the precision rotary balance. 
●Powerful motor brings strong power and efficient grinding and polishing. 
●Spindle leak-proof and super mute design 
●It supports for fast disk system, with the use of elasticity, can be used with automatic grinding device. 
●It can replace the manual grinding and polishing of the procedure, timing and set the speed of grinding head. 
●It can increase the grinding quality and production efficiency 
●This machine can be adapted to various materials preparation of test samples. The polishing disc diameter is large.

DAGP-230 Digital Automatic Metallographic Grinding Polishing Machine Specifications:

Model	DAGP-1-230	DAGP-2-230
Product Name	Digital Automatic Metallographic Grinding and Polishing Machine
Function	Single Disc, Stepless, Auto-head	Dual Disc, Stepless, Auto-head
Polishing and Grinding Disc Diameter	230mm
Abrasive Paper Diameter	230mm
Display	Speed ,Time Countdown,  Air Pressure
Motor	DC Brushless Motor, 220V 400W
Rotating Speed	Stepless 100～1000r/min or Four Speeds  250r/min, 500r/min,750r/min, 1000r/min
Cylinder Pressure	Adjustable (Suggest 0.2~0.3mpa)
Sample Size	Selectable, φ22, φ30, φ45 etc.
Machine Body	Plastic Case, Corrosion Resistant Head, Anti-dust
Grinding Head Motor	DC Brushless Deceleration220V,100W
Grinding Head Speed	Stepless 20-120 r/min
Specimen Chuck	Specimen Clamp Can be Quickly Replaced
Grinding Head Rotating Angle	Adjustable
Grinding Direction	Forward or Reverse
Grinding Time	Adjustable Range 0-100 minutes
Net Weight	50Kg	78Kg
Machine Dimension	420×623×645mm	757×623×645mm

DAGP-230 Digital Automatic Metallographic Grinding Polishing MachinePacking List :

Packing List	Packing List	Packing List
Mainframe	Backing Plate	Water flow-in Pipe
Ø230mm Polishing&Grinding Disc	Ø230mm Adhesive Polishing Cloth	Water flow-out Pipe
Magnetic Disc	Ø230mm Adhesive Abrasive Paper	Instruction Manual/Certificate

TGP Touch Screen Grinding Polishing Machine

 Category： Metallographic Grinding Polishing Machine

Views：13

Controlled by single chip microcomputer

100RPM-1000RPM of stepless speed regulation with touch screen display and control.

Powerful motor brings strong power

Platen speed of polishing disc operates independently.

Product description：TGP Touch Screen Grinding Polishing Machine

TGP Touch Screen Grinding Polishing Machine Description:

●Produced with ABS sewage collection plate and cover with a new and beautiful appearance.

●Controlled by single chip microcomputer, grinding disc 100RPM-1000RPM of stepless speed regulation with touch screen display and control. 
●DC brushless motor can be used for a long time. 
●Non-toxic painted. Strong large support chassis design ensures the precision rotary balance. 
●Powerful motor brings strong power and efficient grinding and polishing 
●Spindle leak-proof design ensures the bearing almost without damage 
●Super mute design brings a good experience. 
●It supports for fast disk system 
●Can be adapted to various materials preparation of test samples. 
●The polishing disc diameter is large 
●The platen speed of polishing disc operates independently.

TGP Touch Screen Grinding Polishing Machine Specifications:

Model	TGP-1-250	TGP-1-300	TGP-2-250	TGP-2-300
Product Name	Touch Screen  Metallograhic Grinding and Polishing Machine
Function	Magnetic Single Disc, Stepless		Dual Single Discs, Stepless
Polishing and Grinding Disc	250mm	300mm	250mm	300mm
Abrasive Paper Diameter	250mm	300mm	250mm	300mm
Rotating Speed	Stepless 100～1000r/min Or Four Speeds: 250r/min, 500r/min, 750r/min, 1000r/min
Motor	DC Brushless Motor,220V, 1.1kw		DC Brushless Motor,220V, 1.1kw
Dimensions	725x500x360mm		725x900x360mm
Net Weight	55kg		93kg

TGP Touch Screen Grinding Polishing Machine Packing List:

Item	TGP-1-250	TGP-1-300	TGP-2-250	TGP-2-300
Machine Mainframe	1 set	1 set	1 set	1 set
Polishing & Grinding Disc	1pc	1pc	2pcs	2pcs
Magnetic Plate	1pc	1pc	2pcs	2pcs
Backing Plate	3pcs	3pcs	6pcs	6pcs
Adhesive Abrasive Paper	6pcs	6pcs	6pcs	6pcs
Adhesive Polishing Cloth	2pcs	2pcs	4pcs	4pcs

GP-230 Metallurgical Grinder Polisher

Category： Metallographic Grinding Polishing Machine

Views：10

Stepless speed regulation

Digital tube displays disc speed

ABS material

The rotation speed of rubbing, polishing, and grinding dish is operated independently

Product description：GP-230 Metallurgical Grinder Polisher

GP-230 Metallurgical Grinder Polisher  Description:

●Stepless speed regulation; 
●DC Brushless Motor 
●Digital tube displays disc speed 
●Single chip microcomputer control 
●Very low noise operation 
●ABS material,newly developed product. 
●Combines three kinds of functions together, change the rubbing, polishing or grinding dish 
●Can finish all process such as rough rubbing, fine rubbing, dry rubbing, wet rubbing and grinding and polishing of various samples. 
●Adapt to the preparations of different materials. 
●The rotation speed of rubbing, polishing, and grinding dish is operated independently, 
●Starts steady, the transmission power is big, low noise. 
●Improve grinding and polishing quality and preparing efficiency.

GP-230 Metallurgical Grinder Polisher  Specification:

Model	GP-1-230	GP-2-230
Name	Metallographic Sample Grinding and Polishing Machine
Function	Stepless Single Disc	Stepless Dual Discs
Grinding and Polishing Wheel Diameter	230mm	230mm
Abrasive Paper Diameter	230mm	230mm
Rotating Speed	100-1400r/min or four speeds:300r/min,600r/min,900r/min,1400r/min	100-1400r/min or four speeds:300r/min,600r/min,900r/min,1400r/min
Electric Motor	DC Brushless 400W, 220V, 50Hz
Dimensions	420×623×320mm	757 ×583× 300mm
Net Weight	30KG	52Kg

GP-230 Metallurgical Grinder Polisher  Packing List:

Item	GP-1-230	GP-2-230
Machine Mainframe	1 set	1 set
Polishing/Grinding Disc	2 pcs(1pc installed well)	3 pcs(2 pcs installed well)
Ring	2pcs(1pc installed well)	3 pcs(2 pcs installed well)
Water flow-in pipe	Input 1 pc, Output 1pc	Input 1 pc, Output 2pcs
Waterproof Abrasive Paper	6 pcs	6 pcs
Instruction Manual	English	English
Certificate	English	English

 

GP-230A/B Metallographic Grinder Polisher

Category： Metallographic Grinding Polishing Machine

Views：7

New design and producing with ABS materials

Big size grinding/polishing disc size

Rotates steadily, Low noise

Durable in use, convenient to safeguard and maintain

Product description：GP-230A/B Metallographic Grinder Polisher

GP-230A/B Metallographic Grinder Polisher Description:

●New design and producing with ABS materials. 
●DC Brushless Electric Motor 
●Durable in use, convenient to safeguard and maintain; 
●Can finish every processes such as rough rubbing, fine rubbing, dry rubbing, wet rubbing, and polishing of various samples 
●Big size grinding/polishing disc size 
●More choices of different linear velocity on the working stage, can increase 20-30% of effective working range,can improve the grinding and polishing quality and efficiency. 
●Rotates steadily, Low noise . 
●An ideal and perfect metallographic sample making machine with complete functions.

GP-230A/B Metallographic Grinder Polisher Specifications:

Model	GP-1-230A	GP-2-230A	GP-2-230B
Name	Metallographic Grinding and Polishing Machine
Fuction	Single Disc/Dual Speeds	Dual Discs/Four Speeds	Dual Discs/Dual Speeds
Grinding and Polishing Disc Diameter	230mm	230mm	230mm
Abrasive Paper Diameter	230mm	230mm	230mm
Rotating  Speed	500r/min, 1000r/min	1000/500r/min, 600/300r/min	500r/1000r/min
Electromotor	YSD802-8/4, 0.25/0.37KW，380V ,50HZ	YSD802-8/4, 0.25/0.37KW，380V,50HZ	YS7124, 0.55KW, 380V, 50HZ
Dimensions(mm)	420x623x310	710×650×370	710×650×370
Net Weight(kg)	35	80	80

GP-230A/B Metallographic Grinder Polisher Packing List:

Item	GP-1-230A	GP-2-230A	GP-2-230B
Machine Mainframe	1 set	1 set	1 set
Polishing/Grinding Disc	2 pcs(1pc installed well)	3 pcs(2 pcs installed well)	3 pcs(2 pcs installed well)
Ring	2 pcs(1 pc installed well)	3pcs(2 pcs installed well)	3 pcs(2 pcs installed well)
Water flow Pipe	Input 1 pc , Output 1 pc	Input 1 pc , Output 2 pcs	Input 1 pc , Output 2 pcs
Waterproof Abrasive Paper	4 pcs	6pcs	6pcs
Instruction  Manual	English	English	English
Product  Certificate	English	English	English

GP-2-200/250 Grinding Polishing Machine

Category： Metallographic Grinding Polishing Machine

Views：15

Economic Equipment

Advanced design

Glass fiber reinforced plastic shell

Switch between two speeds and adjustable speeds

Product description：Grinding Polishing Machine

GP-2-200/250 Grinding Polishing Machine Description:

●Economic Equipment to satisfy sample prepareation,

●Advanced design according to metallographic sample preparing method

●Glass fiber reinforced plastic shell, all stainless steel standard parts

●Dual Discs for change

●Switch between two speeds and adjustable speeds

●One -key repairing program function

GP-2-200/250 Grinding Polishing Machine Specification:

Model	GP-2-200	GP-2-250
Product Name	Metallographic Grinding and Polishing Machine
Grinding Polishing Diameter	200mm	250mmm
Function	Dual Discs /Dual Speeds/Adjustable Speeds
Motor	YSS7124,550W
Speed	150/300 Rpm or 50~600 Rpm Adjustable
Power	220V 50Hz
Dimensions	700×600×270mm
Net Weight	50Kg

      GP-2-200/250 Grinding Polishing Machine Packing List:

Packing List	Packing List	Packing List
Mainframe	2 pcs Polishing Cloth	240#, 400#, 600#,800# Sandpaper each 2 pcs
2 pcs Polishing Disc	2 pcs Aluminium button ring	4 pcs Seal Ring
Power Line	Water flow-in Pipe	Water flow-out Pipe
Instruction Manual	Product Certificate	Packing List Document

AMP-1A Auto Mounting Press

Category： Metallographic Mounting Press

Views：15

Product description：AMP-1A Auto Mounting Press

Description :

1. Digital Touch Screen Automatic Inlaying Machine,Timing, Water Cooling .

2. Suitable for tiny or irregular samples .

3. Preparing for  cutting , grinding and polishing ,hardness testing and spectrum detection.

4. The MCU control program, automatic warming-up, pressurizing, cooling ,pressure Relief

5. Unattended Operating,

6. Humanization, simple operation, high efficiency.

7. Appilicated in Laboratories of Mining Enterprises ,universities,

8. The ideal laboratory sample preparation equipment.

Specification:

Model	AMP – 1A
Product Name	Automatic Mounting Press
Function	Digital Touch Screen , Timing, Water Cooling.
Mould Diameter	22mm, 30mm 45mm (Choose one of them)
Heating Range	110 – 190℃
Cooling Temperature	0-90℃
Dwell Time	0-1600 Seconds
Heating Power	1000W
Power supply	AC220V/50HZ/1phase
Dimension	40 x 50 x 47cm
Weight	45kg

Packing List :

Item	Item	Item
Machine Manframe	Funnel	Hoop
Mosaic powder	Inlet pipe	Instruction Manual
Inner hexagon spanner	Outlet pipe	Cerificate

AMP-1/2 Auto Mounting Press

Category： Metallographic Mounting Press

Views：13

Product description：Auto Mounting Press

 Description:

●Mounting is a very important process of metallographic sample preparation, especially for some difficult holding tiny samples, irregularly shaped samples, or what needs for protecting edge and automatic grinding and polishing, inlaying is an essential process before sample preparation. 
●Automatic mounting press is an advanced hydraulic water-cooling machine. 
●The whole process of mounting is controlled by program, realizing one button operation of the process of heating, loading, holding, cooling and unloading. 
●You can optionally choose one or two of ф22mm, ф30mm, ф45mm three mold specifications, to meet the different needs for different customers. 
●It has solidified the mounting program, especially suitable for thermoset materials, such as electricity jade powder and Bakelite powder materials. 
●Automatic mounting press makes your sample preparation work more easily and more labor-saving and the mounting quality better and more stable.

Specification:

Model	AMP-1	AMP-2
Product Name	Single Head Automatic Mounting Press	Dual Head Automatic Mounting Press
Mould Specification	Φ22mm, Φ30mm, Φ45mm  (choose one)	Φ22mm, Φ30mm, Φ45mm  (choose two)
Heater	220V, 2KW (ф45mm); 220V, 1.2KW	220V, 2KW (ф45mm); 220V, 1.2KW
System pressure	0~18MPa (Ex-factary Setting is 16MPa)	0~20MPa (Ex-factary Setting 12MPa)
Temperature setting range	0~180℃ (Ex-factary Setting120℃)	0~180℃ (Ex-factary Setting  120℃)
Dwell time	Ex-factary Setting 2 min 20s	Ex-factary Setting 2 min 20s
Cooling method	Auto Water cooling	Auto Water cooling
Power	220V, 50HZ	220V, 50HZ
Dimension	520×480×520mm	620×550×550mm
Net Weight	60Kg	105Kg

Packing List:

Packing List	Packing List	Packing List
Machine Mainframe	Measuring cup	Instruction Manual
2 pcs Water Pipe φ10mm	Bakelite powder 30g	Product Certificate

ABG Abrasive Band Grinding Machine

 Category： Abrasive Band Grinding Machine

Views：14

255mm Rooler’s Center Distance

Water-cooling system and dust-collecting system

Width 100mm, Length 920 mm Abrasive Band

1400rpm Rotation Speed

Product description：Abrasive Band Grinding Machine

ABG Abrasive Band Grinding Machine Description:

● Abrasive Band Grinding Machine designed and developed according to the international and most advanced sample method,Change different size of sander belt at any time when necessarily.

● It is easy to replace,It can replace the grinding machine, pre-polishing machine, handy sandpaper so that each belt need just 1-2 minutes to complete the operation.

● To spectrum samples polishing, we can not only save time and manpower but also save a lot of belts , as well as make sure safety, reduce the cost and make sure quality and increase the efficiency.

●The machines is applicated to the enterprises, metallurgical industries as well as Materials R&D testing center, metallographic testing room and spectrum rooms and so on.

ABG Abrasive Band Grinding Machine Specifications:

Model	ABG-1	ABG-2
Product Name	Abrasive Band Grinding Machine
Function	Single Abrasive Band     with Water Cooling	Dual Abrasive Band with Water Cooling
Rooler’s Center Distance	255mm	255mm
System	Water-cooling system and dust-collecting system	Water-cooling system and dust-collecting system
Abrasive Band	Width 100mm, Length 920 mm	Width 100mm, Length 920 mm
Rotation Speed	1400rpm	1400rpm
Belt Speed	768m/min	768m/min
Power supply	550W/380V/50Hz	550W/380V/50Hz
Dimension	550×600×310mm	550×600×310mm

ABG Abrasive Band Grinding Machine Packing List :

Item	Item	Item
Machine Mainframe	Water Flow-out Pipe	Customer Satisfaction Questionnaire
Abrasive Belt(Width100mm, Perimeter920mm)	14-17#Wrench	Product Certificate
Water Flow-in Pipe	Instruction Manual	Packing List Profile